GRILLART Grill Brush and Scraper Bristle Free 18" Stainless Grill Grate Cleaner Review (2026)

Who should reach for this brush

This is a cleaning tool for anyone who wants a grill brush without the safety concerns tied to traditional wire bristle brushes, which can shed bristles that end up stuck in food. GRILLART builds this one around a bristle-free, triple-helix coil design paired with a scraper edge, aimed at owners of charcoal, gas, porcelain, infrared or ceramic grills who still want a mechanical scrub rather than switching to a wood or nylon block. The 18-inch handle is long enough to keep hands and forearms back from a hot grate while cleaning right after cooking, which is when residue comes off easiest. It suits routine after-cook cleaning more than deep-stripping a badly neglected grate, where a dedicated scraper or grate cleaner may still be needed first.

How the bristle-free design works

Instead of loose wire bristles stapled into a head, GRILLART uses hard-wired stainless steel mesh formed into a triple helix coil that scrubs through residue while staying attached to the frame, which is the mechanism behind the bristle-free safety claim. A wide built-in scraper sits alongside the coils for tackling stubborn charred buildup that the coils alone will not lift. The full brush measures about 17.9 by 7 by 3.8 inches and weighs around 16.8 ounces, with a heat-resistant plastic, non-slip handle making up most of that 18-inch length. GRILLART backs the brush with a 3-year replacement warranty, which is a reasonable signal of confidence in the coil's durability under regular use.

Using and maintaining it

Best practice for any grill brush, bristle-free or otherwise, is cleaning the grates while they are still warm right after cooking, when grease and char scrape off with the least effort. The scraper edge handles heavier, caked-on spots, while the coil section works the day-to-day film left after a normal cook. Because there are no loose bristles to shed, there is less need to visually inspect grates for stray wires before cooking, though it is still good practice with any grill brush. Over time and heavy use, the coils can flatten or lose some of their scrubbing bite, at which point GRILLART's replaceable-head design on related models, and the 3-year warranty on this one, give a path to a fresh head rather than buying a whole new brush.

Where it falls short of wire bristle brushes

The trade-off with any bristle-free coil brush is that fine, closely spaced cooking grids can be harder to scrub thoroughly than with traditional wire bristles, which flex into tighter gaps. Compared with the Kona Safe/Clean Grill Brush, another bristle-free stainless option built around similar safety goals, the core mechanism and trade-offs are much the same: strong general cleaning with somewhat less bite on fine grates than loose bristles offer. Against simpler wood-handled scraper tools with no bristles at all, this GRILLART model offers more active scrubbing power thanks to the coils, at the cost of being a slightly bulkier tool to store.

Verdict: who should pick something else

Choose this brush if grill safety around loose bristles is a priority and you want a long-handled tool that combines scrubbing coils with a scraper edge for routine post-cook cleaning. It is a solid all-rounder for charcoal, gas, porcelain and ceramic grates alike. Look elsewhere if you run a grill with very fine or tightly spaced cooking grids where a bristle-free coil struggles to reach every gap, in which case a dedicated grate scraper or a stiff nylon brush used while grates are hot may clean more thoroughly. For typical backyard grates in regular use, the safety upside and 3-year warranty make this a sensible everyday choice.

Frequently asked questions